Keri-systems Doors.NET Manual Uživatelský manuál Strana 251

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 602
  • Tabulka s obsahem
  • ŘEŠENÍ PROBLÉMŮ
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 250
Doors.NET Reference Manual
- 251 -
Perform an Auto Configuration
To detect the slave PXL controllers on the network you must perform an auto-con-
figuration. Auto-config is used to automatically retrieve the controller/door information
from the PXL network and then populate the relevant Doors.NET SQL database tables
with the pertinent hardware details.
1. To perform the auto-config, highlight the master controller in the hardware tree.
2. Click the Auto-Config button.
3. In the Status Message grid you should start to see regular transactions stating:
“PXL Master is searching for slave controllers. It should take no longer than 2 or 3
minutes for the master controller to detect all the slaves on the network. The master
controller always looks for the maximum possible 127 slave controllers.
4. When auto-config has completed, the detected controllers appear in the Available
controllers grid, as shown below.
Zobrazit stránku 250
1 2 ... 246 247 248 249 250 251 252 253 254 255 256 ... 601 602

Komentáře k této Příručce

Žádné komentáře